Electrical Panel Upgrades in Tallahassee, FL
Panel work sits at the center of most larger electrical projects. Describe your current panel and what you are trying to add, and submit a service request.
Why panel capacity comes up so often
A house built around a modest set of loads gradually accumulates new ones: a second refrigerator, a heat pump, a tankless water heater, a shop compressor, a hot tub, an EV charger. Each addition is reasonable on its own. Together they can exceed what the existing service and panel were designed to distribute.
A panel upgrade is usually about three separate things — the service size coming into the house, the number of usable breaker spaces, and the condition of the equipment itself. A panel can be physically full while the service is adequate, or the service can be undersized while the panel still has open spaces. Describing which of these you are running into helps frame the project accurately.
Signals that lead homeowners to ask about a panel
- No open breaker spaces left, or tandem breakers used to squeeze in more circuits
- A 60- or 100-amp service in a home that has added major electrical equipment
- Breakers that trip under normal combined use rather than from a specific fault
- Rust, moisture staining, heat damage, or a burning smell at the panel
- A panel brand or design that an inspector, insurer, or home inspection report has flagged
- A planned addition — EV charging, a generator connection, a kitchen remodel, a shop or garage circuit
What a panel project usually involves
Panel and service work typically touches the utility connection, the meter, the main disconnect, and the grounding and bonding of the system. That combination is why this category commonly requires permitting and coordination with the utility, and why it is not a same-afternoon device swap.
Requirements vary by jurisdiction and by the specifics of the property, so this site does not make blanket claims about permits, inspections, or code for your address. Those questions belong in the conversation with a qualified local provider who can look at the actual installation.
Describing your panel in the request
Useful details include the amperage printed on the main breaker, roughly how many breaker spaces are open, the brand on the panel door, whether the panel is inside or outside, and what you are planning to add. A phone photo of the panel cover and its label is often the fastest way to communicate all of that later in the conversation.
Questions people ask before submitting
- How do I know what size service my home has?
- The rating is usually printed on the main breaker at the top of the panel — commonly 100, 150, 200, or 400 amps. If the label is unreadable, note that in your request rather than guessing.
- Is a panel upgrade required before adding an EV charger?
- Not always. It depends on the existing service size, the loads already present, and the charger's circuit requirement. A load evaluation answers it for a specific home; this website cannot answer it in advance.
Related electrical requests
Service request
Tell us about your panel upgrades project
Submitting this form is a request to be contacted about electrical work at your property. No phone call is required to get started.